Prefix Comma

Description: Scan this barcode to set a comma (ASCII 0x2C) as a prefix to the barcode.

Code: M20209_01

Continuous Scan On

Description: When on, reader will constantly flash its LEDs and attempt to decode. Turn off to disable this feature.

Code: M10012_02

Continuous Scan Off - Default

Description: When on, reader will constantly flash its LEDs and attempt to decode. Turn off to disable this feature.

Code: M10011_01

Motion Detection On when In Stand and Trigger Out of Stand - Default

Description: When on, user has to pass an object in front of the reader window to activate the reader and decode when the reader is in its stand, but must pull the trigger to activate when the reader is out of its stand.

Code: M10403_02

Motion Detection On In and Out of Stand

Description: When on, user has to pass an object in front of the reader window to activate the reader and decode when the reader is both in and out of its stand.

Code: M10404_02

Optimize Motion Detection for Bright Environments - Default

Description: If one of the motion detection scanning modes is enabled, enabling this option will optimize the motion detection algorithms for scanning in normally lit environments.

Code: M10014_03

Optimize Motion Detection for Dark Environments

Description: If one of the motion detection scanning modes is enabled, enabling this option will optimize the motion detection algorithms for scanning in dark environments.

Code: M10015_03

No Motion Detection Delay - Default

Description: If one of the motion detection scanning modes is enabled, this option will trigger motion detect immediately upon seeing motion (i.e. no delay).

Code: M10016_03

500ms Motion Detection Delay

Description: If one of the motion detection scanning modes is enabled, this option will cause the reader to wait 500 milliseconds before attempting to decode, limiting LED misfires.

Code: M10017_03

Motion Detection Off In and Out of Stand

Description: Scan this barcode to turn off motion detection mode when the reader is both in and out of its stand. The user must pull the trigger to activate the reader.

Code: M10013_02

Targeting On - Default

Description: When on, reader will turn on a blue LED bar that helps users aim at the barcode they are attempting to read.

Code: M10153_01

Targeting Off

Description: When on, reader will turn on a blue LED bar that helps users aim at the barcode they are attempting to read.

Code: M10154_01

Cell Phone Reading Enhancement On

Description: When on, reader is optimized for reading barcodes from a mobile phone/smartphone screen.

Code: M10163_01

Turn on Timestamp Prefix

Description: Scan this barcode to enable a data prefix of the current time stamp to the reader output.

Code: M10342_01

Cell Phone Reading Enhancement Off - Default

Description: When on, reader is optimized for reading barcodes from a mobile phone/smartphone screen.

Code: M10162_01

Locked Reader Accept Host Commands - Default

Description: Scan this barcode to allow a Locked Reader to accept commands from a Host.

Code: M10527_01

Locked Reader Reject Host Commands

Description: Scan this barcode to prevent a Locked Reader from accepting commands from a Host.

Code: M10528_01

Reader ID and Firmware Version

Description: Scan this barcode to transmit the reader serial number and current firmware version.

Code: M10157_01

Turn off Timestamp Prefix - Default

Description: Scan this barcode to disable a data prefix of the current time stamp to the reader output.

Code: M10343_02

Australian Post On

Description: When on, reader will decode Australian Post barcodes. Turn off to disable this feature.

Code: M10288_02

Australian Post Off - Default

Description: When on, reader will decode Australian Post barcodes. Turn off to disable this feature.

Code: M10289_02

Aztec Inverse On

Description: When on, reader will decode mirrored barcodes (supported by Aztec, Data Matrix, and QR symbologies). Turn off to disable this feature.

Code: M10020_01

Aztec Inverse & Normal On

Description: When on, reader will decode both normal and inverse (i.e. light barcode on a dark background) Aztec barcodes. Turn off to disable this feature.

Code: M10021_01

Aztec Off

Description: When on, reader will decode normal Aztec barcodes. Turn off to disable this feature.

Code: M10019_01

Codabar On - Default

Description: When on, reader will decode Codabar barcodes without a checksum. Turn off to disable this feature.

Code: M10022_01

Codabar Off

Description: When on, reader will decode Codabar barcodes without a checksum. Turn off to disable this feature.

Code: M10023_01

Remove Codabar Start and Stop Delimiters

Description: Scan to remove the Codabar Start and Stop characters from the data output when reading the Codabar Symbology.

Code: M10537_01

Keep Codabar Start and Stop Delimiters - Default

Description: Scan to maintain the Codabar Start and Stop characters in the data output when reading the Codabar Symbology.

Code: M10538_01

Codablock F On

Description: When on, reader will decode Codablock F barcodes. Turn off to disable this feature.

Code: M10027_01

Codablock F Off - Default

Description: When on, reader will decode Codablock F barcodes. Turn off to disable this feature.

Code: M10026_01

Code 11 On

Description: When on, reader will decode Code 11 barcodes (with or without checksums). Turn off to disable this feature.

Code: M10029_02

Code 11 Off - Default

Description: When on, reader will decode Code 11 barcodes (with or without checksums). Turn off to disable this feature.

Code: M10028_02

Code 11 Checksum Stripped from Result On

Description: When on, reader will strip the checksum on before transmitting.

Code: M10031_02

Code 32 (Italian Pharmacode) On

Description: When on, reader will decode Code 32 barcodes. Turn off to disable this feature.

Code: M10239_02

Code 32 (Italian Pharmacode) Off - Default

Description: When on, reader will decode Code 32 barcodes. Turn off to disable this feature.

Code: M10238_02

Code 39 Off

Description: When on, reader will decode Code 39 barcodes. Turn off to disable this feature.

Code: M10034_02

Code 39 On - Default

Description: When on, reader will decode Code 39 barcodes. Turn off to disable this feature.

Code: M10033_02

Code 39 Checksum On

Description: When on, reader will only scan Code 39 barcodes with a valid checksum. Turn off to disable this feature.

Code: M10036_01

Code 39 Checksum Off - Default

Description: When on, reader will only scan Code 39 barcodes with a valid checksum. Turn off to disable this feature.

Code: M10035_01

Code 39 Checksum Stripped from Result On

Description: When on and checksum required, reader will strip the checksum before transmitting.

Code: M10037_01

Code 39 Extended Full ASCII Off - Default

Description: When on, reader will decode Code 39 barcodes encoding the full set of ASCII characters (128 characters). Turn off to disable this feature.

Code: M10038_01

Code 39 Extended Full ASCII On

Description: When on, reader will decode Code 39 barcodes encoding the full set of ASCII characters (128 characters). Turn off to disable this feature.

Code: M10039_01

Code 93 On - Default

Description: When on, reader will decode standard Code 93 barcodes. Turn off to disable this feature.

Code: M10042_01

Code 93 Off

Description: When on, reader will decode standard Code 93 barcodes. Turn off to disable this feature.

Code: M10043_01

Code 128 On - Default

Description: When on, reader will decode Code 128 barcodes. Turn off to disable this feature.

Code: M10044_01

Code 128 Off

Description: When on, reader will decode Code 128 barcodes. Turn off to disable this feature.

Code: M10045_01

Composite On

Description: When on, reader will decode composite barcodes. Turn off to disable this feature.

Code: M10047_02

Composite Off - Default

Description: When on, reader will decode composite barcodes. Turn off to disable this feature.

Code: M10046_01

Data Matrix Inverse On - Default

Description: When on, reader will decode inverse (i.e. light barcode on a dark background) Data Matrix barcodes. Turn off to disable this feature.

Code: M10051_03

Data Matrix Inverse Off

Description: When on, reader will decode inverse (i.e. light barcode on a dark background) AData Matrix barcodes. Turn off to disable this feature.

Code: M10050_03

Data Matrix Rectangular On & Rectangular Extended On

Description: Scan this barcode to enable the reading of rectangular and extended rectangular Data Matrix barcodes.

Code: M10470_01

Data Matrix Rectangular On & Rectangular Extended Off - Default

Description: Scan this barcode to enable the reading of rectangular Data Matrix barcodes but disable the reading of extended rectangular Data Matrix barcodes.

Code: M10049_01

Data Matrix Rectangular & Rectangular Extended Off

Description: Scan this barcode to disable the reading of rectangular and extended rectangular Data Matrix barcodes.

Code: M10048_01

Grid Matrix On

Description: Scan this barcode to enable the Grid Matrix Symbology.

Code: M10535_01

Grid Matrix Off - Default

Description: Scan this barcode to disable the Grid Matrix Symbology.

Code: M10536_01

All GS1 DataBar On - Default

Description: When on, reader will decode all GS1 DataBar types (Limted, Omnidirectional, Trunctated, Expanded, Stacked). Turn off to disable this feature.

Code: M10054_01

All GS1 DataBar Off

Description: When on, reader will decode all GS1 DataBar types (Limted, Omnidirectional, Trunctated, Expanded, Stacked). Turn off to disable this feature.

Code: M10055_01

GS1 DataBar Limited On

Description: When on, reader will decode GS1 DataBar Limited barcodes. Turn off to disable this feature.

Code: M10056_03

GS1 DataBar Limited Off

Description: When on, reader will decode GS1 DataBar Limited barcodes. Turn off to disable this feature.

Code: M10354_02

GS1 DataBar Expanded On

Description: When on, reader will decode GS1 DataBar 14 Stacked barcodes. Turn off to disable this feature.

Code: M10059_03

GS1 DataBar Expanded Off

Description: When on, reader will decode GS1 DataBar Expanded barcodes. Turn off to disable this feature.

Code: M10417_02

GS1 DataBar Expanded Stacked On

Description: When on, reader will decode GS1 DataBar Expanded Stacked barcodes. Turn off to disable this feature.

Code: M10357_02

GS1 DataBar Expanded Stacked Off

Description: When on, reader will decode GS1 DataBar Expanded Stacked barcodes. Turn off to disable this feature.

Code: M10356_02

GS1 DataBar Stacked and GS1 DataBar Stacked Omnidirectional On

Description: When on, reader will decode GS1 DataBar 14 Stacked barcodes. Turn off to disable this feature.

Code: M10058_03

GS1 DataBar Stacked and GS1 DataBar Stacked Omnidirectional Off

Description: When on, reader will decode GS1 DataBar Stacked Omnidirectional and Stacked barcodes. Turn off to disable this feature.

Code: M10353_03

GS1 DataBar Omnidirectional and GS1 DataBar Truncated On

Description: When on, reader will decode GS1 DataBar 14 Stacked barcodes. Turn off to disable this feature.

Code: M10057_03

GS1 DataBar Omnidirectional and GS1 DataBar Truncated Off

Description: When on, reader will decode GS1 DataBar Omnidirectional and Truncated barcodes. Turn off to disable this feature.

Code: M10355_02

Han Xin On

Description: When on, reader will decode Han Xin barcodes. Turn off to disable this feature.

Code: M10248_01

Han Xin Off - Default

Description: When on, reader will decode Han Xin barcodes. Turn off to disable this feature.

Code: M10249_01

Hong Kong 2 of 5 Off - Default

Description: When on, reader will decode Hong Kong 2 of 5 barcodes. Turn off to disable this feature.

Code: M10078_02

Hong Kong 2 of 5 On

Description: When on, reader will decode Hong Kong 2 of 5 barcodes. Turn off to disable this feature.

Code: M10079_01

Int 2 of 5 On - Default

Description: When on, reader will decode Interleaved 2 of 5 barcodes. Turn off to disable this feature.

Code: M10060_01

Int 2 of 5 Off

Description: When on, reader will decode Interleaved 2 of 5 barcodes. Turn off to disable this feature.

Code: M10061_01

Int 2 of 5 Checksum Stripped from Result On

Description: When on and checksum required, reader will strip the checksum before transmitting.

Code: M10065_01

Int 2 of 5 Checksum On

Description: When on, reader will only scan Interleaved 2 of 5 barcodes with a valid checksum. Turn off to disable this feature.

Code: M10235_01

Int 2 of 5 Checksum Off - Default

Description: When on, reader will only scan Interleaved 2 of 5 barcodes with a valid checksum. Turn off to disable this feature.

Code: M10234_01

Japan Post On

Description: When on, reader will decode Japan Post postal barcodes. Turn off to disable this feature.

Code: M10292_02

Japan Post Off - Default

Description: When on, reader will decode Japan Post postal barcodes. Turn off to disable this feature.

Code: M10293_02

KIX (Dutch Post) Code On

Description: When on, reader will decode KIX postal barcodes. Turn off to disable this feature.

Code: M10290_02

KIX (Dutch Post) Code Off - Default

Description: When on, reader will decode KIX postal barcodes. Turn off to disable this feature.

Code: M10291_02

Korean Post On

Description: When on, reader will decode Korean Post postal barcodes. Turn off to disable this feature.

Code: M10358_01

Korean Post Off - Default

Description: When on, reader will decode Korean Post postal barcodes. Turn off to disable this feature.

Code: M10359_01

Maxicode On

Description: When on, reader will decode Maxicode barcodes. Turn off to disable this feature.

Code: M10067_02

Maxicode Off - Default

Description: When on, reader will decode Maxicode barcodes. Turn off to disable this feature.

Code: M10066_01

Matrix 2 of 5 On

Description: When on, reader will decode Matrix 2 of 5 barcodes. Turn off to disable this feature.

Code: M10069_01

Matrix 2 of 5 Off - Default

Description: When on, reader will decode Matrix 2 of 5 barcodes. Turn off to disable this feature.

Code: M10068_01

Micro PDF417 On

Description: When on, reader will decode Micro PDF417 barcodes. Turn off to disable this feature.

Code: M10073_01

Micro PDF417 Off - Default

Description: When on, reader will decode Micro PDF417 barcodes. Turn off to disable this feature.

Code: M10072_01

MSI Plessey On

Description: When on, reader will decode MSI Plessey barcodes. Turn off to disable this feature.

Code: M10076_01

MSI Plessey Off - Default

Description: When on, reader will decode MSI Plessey barcodes. Turn off to disable this feature.

Code: M10077_01

NEC 2 of 5 On

Description: When on, reader will decode NEC 2 of 5 barcodes. Turn off to disable this feature.

Code: M10082_01

NEC 2 of 5 Off - Default

Description: When on, reader will decode NEC 2 of 5 barcodes. Turn off to disable this feature.

Code: M10083_01

PDF417 On - Default

Description: When on, reader will decode PDF417 barcodes. Turn off to disable this feature.

Code: M10070_01

PDF417 Off

Description: When on, reader will decode PDF417 barcodes. Turn off to disable this feature.

Code: M10071_01

Pharmacode On

Description: When on, reader will decode Pharmacode barcodes. Turn off to disable this feature.

Code: M10275_02

Pharmacode Reverse Barcode Decoding (Right to Left)

Description: When on, reader will decode Pharmacode barcodes that were encoded from right to left. Turn off to disable this feature.

Code: M10280_02

Pharmacode Normal Barcode Decoding (Left to Right)

Description: When on, reader will decode Pharmacode barcodes that were encoded from right to left. Turn off to disable this feature.

Code: M10281_02

Pharmacode Off - Default

Description: When on, reader will decode Pharmacode barcodes. Turn off to disable this feature.

Code: M10274_03

All QR Code On

Description: When on, reader will decode all QR barcode types (standard, inverse, mirror, model 1). Turn off to disable this feature.

Code: M10101_02

Standard QR Code On - Default

Description: When on, reader will decoder standard QR barcodes. Turn off to disable this feature.

Code: M10095_04

All QR Code Off

Description: When on, reader will decode all QR barcode types (standard, inverse, mirror, model 1). Turn off to disable this feature.

Code: M10351_03

Straight 2 of 5 On

Description: When on, reader will decode Straight 2 of 5 barcodes. Turn off to disable this feature.

Code: M10241_01

Straight 2 of 5 Off - Default

Description: When on, reader will decode Straight 2 of 5 barcodes. Turn off to disable this feature.

Code: M10240_01

Telepen On

Description: When on, reader will decode Telepen barcodes. Turn off to disable this feature.

Code: M10103_0

Output Telepen as ASCII

Description: Scan this barcode to enable the output of barcodes encoded in the Telepen symbology to be returned as numerals.

Code: M10521_01

Output Telepen as Numeric - Default

Description: Scan this barcode to enable the output of barcodes encoded in the Telepen symbology to be returned as ASCII characters.

Code: M10520_01

Telepen Off - Default

Description: When on, reader will decode Telepen barcodes. Turn off to disable this feature.

Code: M10104_01

Trioptic On

Description: When on, reader will decode Trioptic barcodes. Turn off to disable this feature.

Code: M10041_01

Trioptic - Enable Reverse Order option (Bit 3)

Description: Scan this barcode to disable the reversing the first and second halves of a Trioptic barcode.

Code: M10446_01

Trioptic - Disable Reverse Order option (Bit 3) - Default

Description: Scan this barcode to disable the reversing the first and second halves of a Trioptic barcode.

Code: M10445_01

Trioptic Off - Default

Description: When on, reader will decode Trioptic barcodes. Turn off to disable this feature.

Code: M10040_01

UK Plessey On

Description: When on, reader will decode UK Plessey barcodes. Turn off to disable this feature.

Code: M10237_02

UK Plessey Off - Default

Description: When on, reader will decode UK Plessey barcodes. Turn off to disable this feature.

Code: M10236_02

UK Royal Mail On

Description: When on, reader will decode United Kingdom Royal Mail postal barcodes. Turn off to disable this feature.

Code: M10294_02

UK Royal Mail Off - Default

Description: When on, reader will decode United Kingdom Royal Mail postal barcodes. Turn off to disable this feature.

Code: M10295_02

UPC Off

Description: When on, reader will decode UPC-A, UPC-E, EAN-13, and EAN-8 barcodes. Turn off to disable this feature.

Code: M10106_01

UPC On - Default

Description: When on, reader will decode UPC-A, UPC-E, EAN-13, and EAN-8 barcodes. Turn off to disable this feature.

Code: M10105_01

UPC Supplemental On

Description: When on, reader will scan the two or five digit supplemental barcode that accompanies some UPC/EAN barcodes.

Code: M10110_01

Transmit UPC-A Number System Off

Description: Scan this barcode to disable transmission of the UPC-A number system digits along with the barcode data when an UPC-A barcode is read.

Code: M10478_01

UPC Supplemental Off - Default

Description: When on, reader will scan the two or five digit supplemental barcode that accompanies some UPC/EAN barcodes.

Code: M10109_01

Transmit UPC-A Check Digit Off

Description: Scan this barcode to enable transmission of the UPC-A check digit along with the barcode data when an UPC-A barcode is read.

Code: M10476_01

Transmit UPC-A Check Digit On - Default

Description: Scan this barcode to enable transmission of the UPC-A check digit along with the barcode data when an UPC-A barcode is read.

Code: M10475_01

Transmit UPC-A Number System On - Default

Description: Scan this barcode to enable transmission of the UPC-A check digit along with the barcode data when an UPC-A barcode is read.

Code: M10477_01

Convert UPC-A to EAN-13 On

Description: Scan this barcode to enable the conversion of UPC-A data to the EAN-13 format when a UPC-A barcode is read.

Code: M10490_01

Convert UPC-A to EAN-13 Off - Default

Description: Scan this barcode to disable the conversion of UPC-A data to the EAN-13 format when a UPC-A barcode is read.

Code: M10489_0

UPC-E Expansion On

Description: When on, reader will expand UPC-E barcodes to UPC-A barcodes. Turn off to disable this feature.

Code: M10108_01

UPC-E Expansion Off - Default

Description: When on, reader will expand UPC-E barcodes to UPC-A barcodes. Turn off to disable this feature.

Code: M10107_01

Transmit UPC-E Number System On - Default

Description: Scan this barcode to enable transmission of the UPC-E number system digits along with the barcode data when an UPC-E barcode is read.

Code: M10481_01

Transmit UPC-E Check Digit Off

Description: Scan this barcode to disable transmission of the UPC-E check digit along with the barcode data when an UPC-E barcode is read.

Code: M10480_01

Transmit UPC-E Check Digit On - Default

Description: Scan this barcode to enable transmission of the UPC-E check digit along with the barcode data when an UPC-E barcode is read.

Code: M10479_01

Transmit UPC-E Number System Off

Description: Scan this barcode to disable transmission of the UPC-E number system digits along with the barcode data when an UPC-E barcode is read.

Code: M10482_01

Transmit EAN-8 Check Digit On - Default

Description: Scan this barcode to enable transmission of the EAN-8 check digit along with the barcode data when an EAN-8 barcode is read.

Code: M10485_01

Transmit EAN-8 Check Digit Off

Description: Scan this barcode to disable transmission of the EAN-8 check digit along with the barcode data when an EAN-8 barcode is read.

Code: M10486_01

Convert EAN-8 to EAN-13 On

Description: Scan this barcode to enable the conversion of EAN-8 data to the EAN-13 format when an EAN-8 barcode is read.

Code: M10488_01

Convert EAN-8 to EAN-13 Off - Default

Description: Scan this barcode to enable the conversion of EAN-8 data to the EAN-13 format when an EAN-8 barcode is read.

Code: M10487_01

Transmit EAN-13 Check Digit On - Default

Description: Scan this barcode to enable transmission of the EAN-13 check digit along with the barcode data when an EAN-13 barcode is read.

Code: M10483_01

Transmit EAN-13 Check Digit Off

Description: Scan this barcode to disable transmission of the EAN-13 check digit along with the barcode data when an EAN-13 barcode is read.

Code: M10484_01

Convert Bookland EAN-13 to ISBN On

Description: Scan this barcode to enable the conversion of Bookland EAN-13 data to the ISBN format when a Bookland EAN-13 barcode is read.

Code: M10492_01

Convert Bookland EAN-13 to ISBN Off - Default

Description: Scan this barcode to disable the conversion of Bookland EAN-13 data to the ISBN format when a Bookland EAN-13 barcode is read.

Code: M10491_01

UPU ID-Tag On

Description: When on, reader will decode the Universal Postal Union ID-Tag postal barcode. Turn off to disable this feature.

Code: M10360_02

UPU ID-Tag Off - Default

Description: When on, reader will decode the Universal Postal Union ID-Tag postal barcode. Turn off to disable this feature.

Code: M10361_02

USPS Intelligent Mail/IMB/ 4-State CB On

Description: When on, reader will decode United Kingdom Royal Mail postal barcodes. Turn off to disable this feature.

Code: M10286_02

USPS Intelligent Mail/IMB/ 4-State CB Off - Default

Description: When on, reader will decode the United States Postal Service Intelligent Mail postal barcode. Turn off to disable this feature.

Code: M10287_02

USPS Planet On

Description: When on, reader will decode the United States Postal Service Planet postal barcode. Turn off to disable this feature.

Code: M10284_02

USPS Planet Off - Default

Description: When on, reader will decode the United States Postal Service Planet postal barcode. Turn off to disable this feature.

Code: M10285_02

USPS Postnet On

Description: When on, reader will decode the United States Postal Service Postnet postal barcode. Turn off to disable this feature.

Code: M10282_02

USPS Postnet Off - Default

Description: When on, reader will decode the United States Postal Service Postnet postal barcode. Turn off to disable this feature.

Code: M10283_02

Grid Matrix & Grid Matrix Inverse Decoding On

Description: Scan this barcode to enable reading of Grid Matrix & Grid Matrix Inverse (white on black) symbologies

Code: M10544_01

Grid Matrix, Grid Matrix Inverse & Grid Matrix Mirror Decoding

Description: Scan this barcode to enable reading of Grid Matrix, Grid Matrix Inverse & Grid Matrix Mirror

Code: M10546_01

Grid Matrix & Grid Matrix Mirror Decoding On

Description: Scan this barcode to enable reading of Grid Matrix & Grid Matrix Mirror

Code: M10545_01

GoCode & GoCode Inverse Decoding

Description: GoCode & GoCode Inverse Decoding

Code: M10547_01

GoCode & GoCode Mirror Decoding On

Description: Scan this barcode to enable reading of GoCode & GoCode Mirror

Code: M10548_01

GoCode, GoCode Inverse & GoCode Mirror Decoding On

Description: Scan this barcode to enable reading of GoCode, GoCode Inverse & GoCode Mirrorv

Code: M10549_01

Code 11 Decoding with one checksum digit checked, and remove checksum from output On

Description: Scan this barcode to enable reading of Code 11 Decoding with one checksum digit checked, and remove checksum from output

Code: M10550_01

Keyboard Support: French Keyboard Mapping for Apple

Description: Scan this barcode to use a French keyboard map for Apple devices.

Code: M10420_02

Keyboard Support: USInternational (Universal) Keyboard Mapping for Windows

Description: Scan this barcode to use a US International (Universal) keyboard map for Windows devices.

Code: M10469_01

English Keyboard Mapping for Apple

Description: Scan this barcode to use a English Keyboard Map for Apple devices. This map has been aligned with Apple published maps.

Code: M10419_02

Keyboard Support: Spanish Keyboard Mapping for Apple

Description: Scan this barcode to use a Spanish keyboard map for Apple devices.

Code: M10424_02

Italian Keyboard Mapping for Apple

Description: Scan this barcode to use a Italian Keyboard Map for Apple devices. This map has been aligned with Apple published maps.

Code: M10423_02

German-Swiss Keyboard Mapping for Apple

Description: Scan this barcode to use a Swiss German Keyboard Map for Apple devices. This map has been aligned with Apple published maps.

Code: M10422_02

German Keyboard Mapping for Apple

Description: Scan this barcode to use a German Keyboard Map for Apple devices. This map has been aligned with Apple published maps.

Code: M10421_02

Russian Keyboard Mapping for Windows

Description: Scan this barcode to use a Russian Keyboard Map for Windows devices. This map has been aligned with Microsoft published maps.

Code: M10418_02

Data Encoding: Raw ASCII to Keyboard XML File Lookup - Default

Description: Scan this barcode to define the input encoding as ASCII and do not do an intermediate conversion of the output.

Code: M10514_01

Data Encoding: UTF8 to Unicode Codepoint - Alt Sequences for Windows

Description: Scan this barcode to define the input encoding as UTF-8 and do an intermediate conversion of the output to Unicode codepoints.

Code: M10515_01

Reader (Legacy) - US English Keyboard Mapping - with Leading 0 for Non Printable ASCII - Default

Description: Scan this barcode to use an English International (Universal) keyboard map for Windows devices. This map has been aligned with Microsoft published maps.

Code: M10411_01

Shift-JIS Mode for Japanese Windows OS

Description: Scan this barcode to prepare the reader to pass Shift-JIS encoded barcode data to Japanese language Windows. Includes setting input and output types, language file & keyboard map.

Code: M10552_02

Shift-JIS Mode for English Windows OS

Description: Scan this barcode to prepare the reader to pass Shift-JIS encoded barcode data to English language Windows. Includes setting input and output types, language file & keyboard map.

Code: M10553_01

Alternative Operating System (Linux/Mac) On

Description: When on, the reader will modify its enumeration and communication scheme to work on Linux, Windows CE, or OS X operating systems.

Code: M10123_02

Alternative Operating System (Linux/Mac) Off - Default

Description: When on, the reader will modify its enumeration and communication scheme to work on Linux, Windows CE, or OS X operating systems.

Code: M10122_02

Reset to USB Factory Defaults

Description: Scan this barcode to return a wired USB reader to its default state.

Code: M10002_02

USB Keyboard Mode

Description: Scan this barcode to transmit barcode data as keyboard data via USB.

Code: M10200_01

USB Downloader Mode

Description: Scan this barcode to place the reader in USB Downloader Mode. This mode allows file transfer to/from the reader. File types eligible for transfer include firmware, configuration, and images (also default mode for CortexTools).

Code: M10004_02

USB HID POS Mode (Terminal ID 131)

Description: Scan this code to place the reader in HID POS mode, where it will communicate using the Human Interface Device class and Point of Sale usage as outlined in usb.org implementation documents. This code will also enable AIM ID.

Code: M10425_01

USB Native Two Way Mode

Description: Scan this barcode to place the reader in bi-directional, packetized USB mode with automatic retry on packets.

Code: M10006_02

USB Virtual COM One Way Mode

Description: Scan this barcode to use Virtual COM (VCOM) mode to transfer batch data. The reader will talk to a virtual COM port on the host device and transmit data serially (i.e. like an RS232 device).

Code: M10005_01

USB Virtual COM Multiple Ports

Description: Scan this barcode to have the reader tell the Virtual COM (VCOM) driver to setup a new virtual COM port when the reader is connected to the host.

Code: M10431_01

USB Virtual COM Common Ports

Description: Scan this barcode to have the reader tell the Virtual COM (VCOM) driver to connect this reader on an already-established virtual COM port.

Code: M10432_01

USB Speed High Speed - Default

Description: Scan this barcode to transmit batched data over USB at high speed. The host must be capable of receiving data at these speeds. Full Speed USB will transmit data at 12 megabits per second (Mbps). High Speed USB will transmit data at 480 Mbps.

Code: M10160_01

USB Speed Full Speed

Description: Scan this barcode to transmit batched data over USB at full speed. The host must be capable of receiving data at these speeds. Full Speed USB will transmit data at 12 megabits per second (Mbps). High Speed USB will transmit data at 480 Mbps.

Code: M10161_01

Reader - Enable RS232 OPOS/JPOS

Description: Scan this barcode to transmit barcode data as a OPOS/JPOS device over a serial cable. This also enables the AIM identifier prefix, does not expect a response from the host, enables packet mode, disables flow control, and sets the baud rate to 115200.

Code: M10467_01

Reset to RS232 Factory Defaults CR1000

Description: Scan this barcode to restore the reader to RS232 defaults (RS232 Communication Mode, 115200 baud, eight data bits, no parity, one stop bit).

Code: M10389_03

RS232 Interface No Parity - Default

Description: Scan this barcode to turn off the parity bit for RS232 data transmissions. The parity setting for the reader should match the host parity setting.

Code: M10402_01

RS232 Interface Flow Control - Hardware

Description: When on, reader will leverage the Request To Send (RTS) and Clear To Send (CTS) lines to regulate RS232 data transmission. The host must be setup to operate the signal lines appropriately. Turn flow control off to disable this feature.

Code: M10409_01

RS232 Packet Mode

Description: When in packet mode, the reader will send data using packets to strengthen accurate communication. This includes leveraging framing, a checksum, and software flow control (ACK/NAK). When in raw mode, data is transmitted as is.

Code: M10388_02

RS232 Raw Mode - Default

Description: When in packet mode, the reader will send data using packets to strengthen accurate communication. This includes leveraging framing, a checksum, and software flow control (ACK/NAK). When in raw mode, data is transmitted as is.

Code: M10387_01

Output Good Read on RTS line Off - Default

Description: Scan this barcode to disable the output of a Good Read signal on the RTS line of a reader connected via Serial cable.

Code: M10522_01

Output Good Read on RTS line - Active Low

Description: Scan this barcode to enable the output of an active low Good Read signal on the RTS line of a reader connected via Serial cable.

Code: M10523_01

Output Good Read on RTS line - Active High

Description: Scan this barcode to enable the output of an active high Good Read signal on the RTS line of a reader connected via Serial cable.

Code: M10524_01

Clear All JavaScript Rules

Description: Scan this barcode to clear any JavaScript rules loaded to the reader.

Code: M10139_02

Reader Text Commands On

Description: When on, reader will accept configuration changes via text commands sent over the communication channel; requires communication that supports transmission to the reader (USB Downloader Mode, USB Native Two Way Mode, RS232). Turn off to disable this feature.

Code: M10137_01

Reader Text Commands Off - Default

Description: When on, reader will accept configuration changes via text commands sent over the communication channel; requires communication that supports transmission to the reader (USB Downloader Mode, USB Native Two Way Mode, RS232). Turn off to disable this feature.

Code: M10136_01

Clear All Stored Data and Images

Description: Scan this barcode to clear reader storage of all scanned data (including images).

Code: M10138_02

Save All Reader Settings - Default

Description: Scan this barcode to save any temporary changes you have made to reader settings.

Code: M10159_01

Reboot Reader

Description: Scan this barcode to reboot (power down and restart) the reader.

Code: M10296_01

Beep Volume 0%

Description: Scan this barcode to turn off the beeper.

Code: M20339

Beep Volume 33%

Description: Scan this barcode to reduce beeper volume to 33% of maximum.

Code: M20340

Beep Volume 67%

Description: Scan this barcode to reduce beeper volume to 67% of maximum.

Code: M20341

Beep Volume 100% - Default

Description: Scan this barcode to turn on the beeper at its highest volume.

Code: M20342

Aztec On - Default

Description: Scan this barcode to enable decoding of Aztec barcodes.

Code: M20002_01

Prefix Space

Description: Scan this barcode to set a comma (ASCII 0x2C) as a prefix to the barcode.

Code: M20210_01

Prefix Tab (USB Keyboard Mode Only)

Description: Scan this barcode to set a keyboard tab as a prefix to the barcode.

Code: M20218_02

Prefix Tab (RS232 Mode Only)

Description: Scan this barcode to set a tab (ASCII 0x09) as a prefix to the barcode.

Code: M20211_01

Suffix Comma

Description: Scan this barcode to set a comma (ASCII 0x2C) as a prefix to the barcode.

Code: M20215_01

Suffix Space

Description: Scan this barcode to set a space (ASCII 0x20) as a prefix to the barcode.

Code: M20216_01

Suffix Enter (USB Keyboard Mode Only)

Description: Scan this barcode to set a keyboard enter as a suffix to the barcode.

Code: M20219_02

Suffix Tab (USB Keyboard Mode Only)

Description: Scan this barcode to set a keyboard tab as a prefix to the barcode.

Code: M20220_02

Suffix Tab (RS232 Mode Only)

Description: Scan this barcode to set a tab (ASCII 0x09) as a suffix to the barcode.

Code: M20217_01

Suffix Carriage Return (RS232 Mode Only)

Description: Scan this barcode to set a carriage return (ASCII 0x0D) as a suffix to the barcode.

Code: M20212_01

Suffix Carriage Return Line Feed (RS232 Mode Only) - Default

Description: Scan this barcode to set a carriage return (ASCII 0x0D) and line feed (ASCII 0x0A) as a suffix to the barcode.

Code: M20213_01

Suffix Line Feed (RS232 Mode Only)

Description: Scan this barcode to set a line feed (ASCII 0x0A) as a suffix to the barcode.

Code: M20214_01

Prefix AIM ID Off - Default

Description: When on, reader will output a symbology identifier (as defined by the AIM Organization) as a prefix to the barcode.

Code: M20343_01

Prefix AIM ID On

Description: When on, reader will output a symbology identifier (as defined by the AIM Organization) as a prefix to the barcode.

Code: M20344_01

Code 49 On

Description: Scan this barcode to enable reading Code 49 encoded barcodes.

Code: M20263_01

Code 49 Off - Default

Description: Scan this barcode to disable reading Code 49 encoded barcodes.

Code: M20264_01

Convert Bookland EAN-13 to ISSN

Description: Scan this barcode to enable the conversion of Bookland EAN-13 data to the ISSN format when a Bookland EAN-13 barcode is read.

Code: M20138_01

Do Not Convert Bookland EAN-13 to ISSN - Default

Description: Scan this barcode to disable the conversion of Bookland EAN-13 data to the ISSN format when a Bookland EAN-13 barcode is read.

Code: M20139_01

Control Character Input - Ctrl + Character

Description: Scan this barcode to use Control+Character handling of non-printable characters. This applies to Windows language files only.

Code: M20351_01

Control Character Input - Alt + Keypad

Description: Scan this barcode to use Alt+Keypad Numbers with No Leading Zero handling of non-printable characters. This applies to Windows language files only.

Code: M20352_01

Control Character Input -Alt + Leading Zero

Description: Scan this barcode to use Alt+Keypad Numbers with Leading Zero handling of non-printable characters. This applies to Windows language files only.

Code: M20353_01

RS232 Interface - 1200 Baud Rate

Description: Scan this barcode to set the modulation rate for RS232 data being sent to a host to 1200 baud. The baud rate for the reader must match the host\'s baud rate.

Code: M20160_01

RS232 Interface - 2400 Baud Rate

Description: Scan this barcode to set the modulation rate for RS232 data being sent to a host to 2400 baud. The baud rate for the reader must match the host\'s baud rate.

Code: M20161_01

RS232 Interface - 4800 Baud Rate

Description: Scan this barcode to set the modulation rate for RS232 data being sent to a host to 4800 baud. The baud rate for the reader must match the host\'s baud rate.

Code: M20162_01

RS232 Interface - 9600 Baud Rate

Description: Scan this barcode to set the modulation rate for RS232 data being sent to a host to 9600 baud. The baud rate for the reader must match the host\'s baud rate.

Code: M20163_01

RS232 Interface - 19200 Baud Rate

Description: Scan this barcode to set the modulation rate for RS232 data being sent to a host to 19200 baud. The baud rate for the reader must match the host\'s baud rate.

Code: M20164_01

RS232 Interface - 38400 Baud Rate

Description: Scan this barcode to set the modulation rate for RS232 data being sent to a host to 38400 baud. The baud rate for the reader must match the host\'s baud rate.

Code: M20165_01

RS232 Interface - 57600 Baud Rate

Description: Scan this barcode to set the modulation rate for RS232 data being sent to a host to 57600 baud. The baud rate for the reader must match the host\'s baud rate.

Code: M20166_01

RS232 Interface - 115200 Baud Rate - Default

Description: Scan this barcode to set the modulation rate for RS232 data being sent to a host to 115200 baud. The baud rate for the reader must match the host\'s baud rate.

Code: M20167_01

RS232 Interface - 7 Data Bits

Description: Scan this barcode to set the number of data bits used for RS232 data transmission to seven. The data bit setting for the reader must match the host\'s data bit setting.

Code: M20168_01

RS232 Interface - 8 Data Bits - Default

Description: Scan this barcode to set the number of data bits used for RS232 data transmission to eight. The data bit setting for the reader must match the host\'s data bit setting.

Code: M20169_01

RS232 Interface - 1 Stop Bit - Default

Description: Scan this barcode to set the number of stop bits used for RS232 data transmission to one stop bit. The stop bit setting for the reader must match the host\'s stop bit setting

Code: M20170_01

RS232 Interface - 2 Stop Bits

Description: Scan this barcode to set the number of stop bits used for RS232 data transmission to two stop bits. The stop bit setting for the reader must match the host\'s stop bit setting

Code: M20171_01

RS232 Interface - Even Parity

Description: Scan this barcode to add a parity bit to RS232 data transmissions for error checking. Parity can be odd, even, or turned off (i.e.

Code: M20172_01

RS232 Interface - Odd Parity

Description: Scan this barcode to turn off the parity bit for RS232 data transmissions. The parity setting for the reader must match the host\'s parity setting.

Code: M20174_01

RS232 Interface Flow Control Off - Default

Description: Scan this barcode to disable the utilization of the Request To Send (RTS) and Clear To Send (CTS) lines to regulate RS232 data transmission. The host must be setup to operate the signal lines appropriately.

Code: M20176_01

1 Second Duplicate Scan Delay

Description: Scan this barcode to set a 1 second delay between scans of the same barcode (i.e. the amount of time you must wait after scanning a barcode before you can scan that same barcode again unless you scan a different barcode first).

Code: M20230_01

2 Second Duplicate Scan Delay

Description: Scan this barcode to set a 2 second delay between scans of the same barcode (i.e. the amount of time you must wait after scanning a barcode before you can scan that same barcode again unless you scan a different barcode first).

Code: M20231_01

3 Second Duplicate Scan Delay

Description: Scan this barcode to set a 3 second delay between scans of the same barcode (i.e. the amount of time you must wait after scanning a barcode before you can scan that same barcode again unless you scan a different barcode first).

Code: M20232_01

5 Second Duplicate Scan Delay

Description: Scan this barcode to set a 5 second delay between scans of the same barcode (i.e. the amount of time you must wait after scanning a barcode before you can scan that same barcode again unless you scan a different barcode first).

Code: M20233_01

10 Second Duplicate Scan Delay

Description: Scan this barcode to set a 10 second delay between scans of the same barcode (i.e. the amount of time you must wait after scanning a barcode before you can scan that same barcode again unless you scan a different barcode first).

Code: M20234_01

30 Second Duplicate Scan Delay

Description: Scan this barcode to set a 30 second delay between scans of the same barcode (i.e. the amount of time you must wait after scanning a barcode before you can scan that same barcode again unless you scan a different barcode first).

Code: M20235_01

1 Hour Duplicate Scan Delay

Description: Scan this barcode to set a 1 hour delay between scans of the same barcode (i.e. the amount of time you must wait after scanning a barcode before you can scan that same barcode again unless you scan a different barcode first).

Code: M20236_01

1 Day Duplicate Scan Delay

Description: Scan this barcode to set a 1 day delay between scans of the same barcode (i.e. the amount of time you must wait after scanning a barcode before you can scan that same barcode again unless you scan a different barcode first).

Code: M20237_01

Anti-Glare On

Description: When on, Code\'s patented glare reduction technology facilitates reading barcodes on a shiny surface or behind a laminate. Turn off to disable this feature (recommended setting is off for general reading).

Code: M10352_01

Anti-Glare Off - Default

Description: When on, Code\'s patented glare reduction technology facilitates reading barcodes on a shiny surface or behind a laminate. Turn off to disable this feature (recommended setting is off for general reading).

Code: M10433_01

Mirroring On

Description: When on, reader will decode mirrored barcodes (supported by Aztec, Data Matrix, and QR symbologies). Turn off to disable this feature.

Code: M10125_01

Mirroring Off - Default

Description: When on, reader will decode mirrored barcodes (supported by Aztec, Data Matrix, and QR symbologies). Turn off to disable this feature.

Code: M10124_02

Convert output to lowercase

Description: Scan this barcode to convert all reader alpha output to lower case letters.

Code: M10439_01

Erase Prefix & Suffix Data - Default

Description: Scan Clear All Prefixes to remove all prefixes. Scan Clear Suffixes to remove all suffixes. Scan Clear All Prefixes and Suffixes to remove both.

Code: M10135_01

Erase Prefix Data - Default

Description: Scan Clear All Prefixes to remove all prefixes. Scan Clear Suffixes to remove all suffixes. Scan Clear All Prefixes and Suffixes to remove both.

Code: M10126_01

Erase Suffix Data - Default

Description: Scan Clear All Prefixes to remove all prefixes. Scan Clear Suffixes to remove all suffixes. Scan Clear All Prefixes and Suffixes to remove both.

Code: M10130_01

Prefix Carriage Return Line Feed (RS232 Mode Only)

Description: When on, reader will transmit a carriage return (ASCII 0x0D) and Line Feed (ASCII 0x0A) as a prefix to the barcode.

Code: M10405_01

Translate all Characters to Uppercase On

Description: Scan this barcode to translate all alphabetic data to upper case.

Code: M10220_03

Translate all Characters to Uppercase Off - Default

Description: Scan this barcode to transmit alphabetic characters in whichever case they are encoded.

Code: M10426_02

Reader - USB Virtual COM CDC Raw Mode

Description: Scan this barcode to enable support for the communications device class (CDC) interface on Linux.

Code: M10438_01

Read Both Wide and High Density Field - Default

Description: Scan this barcode to read from both optical fields.

Code: M10190_01

Read Wide Field Only

Description: Scan this barcode to read from the wide optical field only

Code: M10182_01

English (US) Keyboard Mapping for Windows

Description: Scan this barcode to use a US English Keyboard Map for Windows devices. This map has been aligned with Microsoft published maps.

Code: M10460_02

English (UK) Keyboard Mapping for Windows

Description: Scan this barcode to use a UK English Keyboard Map for Windows devices. This map has been aligned with Microsoft published maps.

Code: M10471_01

Belgian French Keyboard Mapping for Windows

Description: Scan this barcode to use a Belgian French Keyboard Map for Windows devices. This map has been aligned with Microsoft published maps.

Code: M10461_02

French Keyboard Mapping for Windows

Description: Scan this barcode to use a French Keyboard Map for Windows devices. This map has been aligned with Microsoft published maps.

Code: M10462_02

German Keyboard Mapping for Windows

Description: Scan this barcode to use a German Keyboard Map for Windows devices. This map has been aligned with Microsoft published maps.

Code: M10463_02

Japanese Keyboard Mapping for Windows

Description: Scan this barcode to use a Japanese Keyboard Map for Windows devices. This map has been aligned with Microsoft published maps.

Code: M10464_02

Latin American Keyboard Mapping for Windows

Description: Scan this barcode to use a Latin American Spanish Keyboard Map for Windows devices. This map has been aligned with Microsoft published maps.

Code: M10465_02

Spanish Keyboard Mapping for Windows

Description: Scan this barcode to use a Spanish Keyboard Map for Windows devices. This map has been aligned with Microsoft published maps.

Code: M10472_01

Swiss German Keyboard Mapping for Windows

Description: Scan this barcode to use a Swiss German Keyboard Map for Windows devices. This map has been aligned with Microsoft published maps.

Code: M10466_02

Control Character Input - Language - Default

Description: Scan this barcode to use the language file default handling of non-printable characters. This applies to Windows language files only.

Code: M10441_01

Duplicate Scan Disabled - Default

Description: Scan this barcode to turn off the delay between scans of the same barcode.

Code: M10144_01