Quick Connect Barcodes

QuickConnect Code for Bluetooth® Devices (Serial Applications Only)

QuickConnect Codes are used to link Bluetooth® Code barcode readers to other Bluetooth-enabled devices. Use this page to generate a QuickConnect Code. Print and scan the QuickConnect Code to establish the Bluetooth connection.

Create a QuickConnect Code

Before a QuickConnect Code can be created, you will need to know the Bluetooth address (often referred to as the BD_ADDR) of that device. Where do I find Bluetooth addresses?

Create QuickConnect Codes for Serial Applications and/ or for RF 1-Way Mode Applications.

1. Enter the Bluetooth address:
Note: Enter 12-digit hexadecimal address numbers only

 

2. Click the Submit button.

Create a QuickConnect Code for applications using CodeXML™ Router and RF 2-Way Mode Applications..

1. Enter the Bluetooth address:
Note: Enter 12-digit hexadecimal address numbers only




2. Click the Submit button.

*For advanced users only.

Enter the following information to create QuickConnect Barcodes.

1. Select a code size:

Easy-to-read, large barcode

Smaller barcode, more convenient for placement

2. Select communication type:

None

Standard / Serial Application One Way-Max Range

Standard / Serial Application One Way-Max Reliability

CodeXML Router Two Way Application

3. Enter one or more Bluetooth addresses: Address 1:
Address 2:
Address 3:
Address 4:
Address 5:

Note: Enter 12-digit hexadecimal address numbers only

4. Click the Submit button.